Tel: 01625 429211
Fax: 01625 619094

Gietz FSA 720 MFF Hot foil stamping, embossing and die cutting machine
Serial No. 11805 : Year 1988

An excellent and well specified example of a well maintained Gietz FSA 720 hot foil stamping, embossing and die cutting machine
Fully serviced by ourselves as UK Distributor

Maximum sheet size 720 x 520mm
Maximum sheet size (without overshoot control) with push type side lay 770 x 560mm
Minimum sheet size 297 x 210mm
Maximum stamping area 720 x 500mm
Thermostat adjustable up to 200° C
Maximum foil advance, longitudinal 3 each top & middle 2 x 695mm bottom 1 x 510mm
Maximum foil width longitudinal 725mm
Maximum foil diameter 1" core 60mm
Pile height max 950mm
Pile weight up to 700kg
Delivery pile height 700mm
Total capacity of motors 18.5kW
Heating capacity 9.0kW
Net weight of complete machine 7000kgs
Floor space, including control console, approx 4m x 2.9m
Height of machine 1.9m
Air pressure - to be provided by the customer (25 Nqm:5 - 7 ba)

Included with the machine are:
Spiess feeder with pre-load and non stop device
3 Mechanical foil pulls
Central lubrication
Transverse foiling unit for foiling across the sheet running direction
Die cutting chase
Honeycomb

Price: on application

For high speed wire-o-binding of books and calendar products. This machine can be fed with perfect / false bound book blocks in addition to lose leaf sets.

The machine incorporates many options including hand feeding station, spine trimmer for trimming off perfect bound book block spines, punching station and 2 x cover feeders.

Offered as seen, in running condition.

Price : on application

Specifications

Kugler-Womako Model HS 534W Automatic Wire Binding Machine
for 1-up production of double wire bound products

Kugler-Womako Model HS 534W

Consisting of:
01) Double hand feeding station in front of spine trimmer for stapled or glued books

113.1) Spine trimmer HS 534 for bound side of 420mm for cutting off the glued or stapled back of the book

1) Hand feeding station

2) Section dividing station for dividing sections into partial sections of max 3-4mm thickness (according to hole diameter)

11.1) Inserter for cover or bottom sheets up to 1mm thickness

3) Punching station with fixed bottom and moveable top bar distance between holes, standard 3:1”, 2:1” also possible

4) Re-collating station

15) Inserter for flexible top or bottom sheets (up to approx 1mm and 420mm bound side) also applicable for wrap-around covers

15.1) Integrated punch

5) Centring station

6) Aligning station for accurate aligning of sections

7) Double wire binding unit (for each diameter of wire combs a different set of tools is needed) with wire unwind stand to take up James Burn “Jumbo” reels of 600mm diameter

7.A+B) Assorted closing tools

7.1) Calendar hanger inserting system

7.1.2) Automatic hanger infeed from James Burn spool

8) Bottom board turning device

9) Delivery belt