Mod. S3 250/330 Hot Printing Machine

Hot printing machine composed of three separate steel modular sections, independently controlled (two for printing and one for die cutting). Quick machine set up due to three separate head settings: (longitudinal, transverse, and rotary). Electronic material transport for printing, and keyboard programming in millimetres and/or inches up to a correction adjustment of 1/10 th.

Two keyboard controlled independent foil transport systems for each head: transport in longitudinal or transverse direction by rotating the foil reel support 90 through degrees.

Electronic speed control up to maximum of approx. 9000 cycles/hour according to printing size. Rewinding on two separate shafts with mechanical clutch control. The machine is equipped with all safety requirements according to current CE standards.

The machine can be equipped with the following optionals on request:

  • Photocell re-register device

  • Slitting unit

  • Sheeting unit

  • Laminating unit

Mod. S3 330

  • Weight 2000KG

  • Height 1.750 mm

  • Length 4.200 mm

  • Power consumption 4.500 watt

  • Depth 1.300 mm

  • Printing and die plate measurements mm 310 x 280

  • Material passage width 330 mm

  • Hot printing and die-cutting surface 240 x 240 mm

  • Material passing width 250 mm

  • Cycles per hour 5.000 max (ony die-cutting 9.000 max only printing 7.000 max)

Mod. S3 250

  • Weight 2000KG

  • Height 1.750 mm

  • Length 4.200 mm

  • Power consumption 4.500 watt

  • Depth 1.300 mm

  • Printing and die plate measurements mm 230 x 230

  • Material passage width 250 mm

  • Hot printing and die-cutting surface 310 x 290 mm

  • Material passing width 330 mm

  • Cycles per hour 7.000 max (ony die-cutting 9.000 max only printing 7.000 max)